Noctua NF-A8 FLX 2000RPM - pcpromaroc
Noctua NF-A8 FLX 2000RPM - pcpromaroc
Noctua NF-A8 FLX 2000RPM - pcpromaroc Noctua NF-A8 FLX 2000RPM - pcpromaroc Noctua NF-A8 FLX 2000RPM - pcpromaroc Noctua NF-A8 FLX 2000RPM - pcpromaroc Noctua NF-A8 FLX 2000RPM - pcpromaroc

Ventilateur Noctua NF-A8 FLX 2000RPM

Nous vous présentons a pcpromaroc Ventilateur Noctua NF-A8 FLX 2000RPM fourni par noctua

Référence pcpromaroc: A057747

492,75 DH TTC

410,62 DH HT

410,62 DH (HT)
Tous les prix incluent la TVA
État des stocks: Très faible
Les derniers en stock
notifications_active Derniers articles en stock

Poser une question (0)

Fais-moi signe quand le prix moins cher:

Vous recevrez 4.11 Point convertible en code de réduction. lors de l'achat 1 unités de ce produit.
RPM MAX 2000 

The NF-A8 is a highly optimized and high quality 80mm silent fan. Since it has the Noctua AAO (Advanced Acoustic Optimization) framework and the characteristics of a sophisticated aerodynamic design, such as the Flow Acceleration Channels, the NF-A8 improves the recognized silent cooling performance of the NF- R8, how awarded has been. The FLX version allows you to adjust the speed, 2000/1650/1200 rpm, thanks to its Noise Reduction Adapters that allow you to offer complete flexibility when adjusting the fan for maximum ventilation performance or operation close to absolute silence . Its smooth and quiet operation,

Beating the award-winning NF-R8

The Noctua NF-R8 fan has become the quintessential choice among PC enthusiasts looking for high quality 80mm silent fans. Thanks to its deep aerodynamic optimization, the NF-A8 provides higher static pressure and a better airflow / noise rate than its acclaimed predecessor.

Flow Acceleration Channels

The rotor of the NF-A8 has Flow Acceleration Channels on the suction side. By increasing the speed of the air flow in the outer crucial regions of the blades, this measure reduces the separation of the flow on the suction side and thus resulting in greater efficiency and less vortex noise.

AAO frame

Noctua's AAO (advanced acoustic optimization) frames feature integrated anti-vibration pads, as well as the step-by-step entry design and internal surface microstructures (both owned by Noctua), which further enhance the sound efficiency and performance of the fan.

Step by step input design

Noctua's step-by-step entry design adds turbulence to the air inlet to facilitate the transition from laminar flow to turbulent flow, which reduces tonal input noise, improves flow attachment and increases suction capacity, especially in environments with restricted space.

Internal surface microstructures

With the ends of the fan blades colliding with the boundary layer created by the Inner Surface Microstructures (internal surface microstructures), the separation of the flow from the suction side of the blades decreases significantly, resulting in a noise of passage between the lower blades, better air flow and greater pressure efficiency.

Integrated anti-vibration pads

The integrated anti-vibration pads, made of extra soft silicone, minimize the transmission of vibrations per minute, while maintaining compatibility with all standard mounting systems and fan clips used in heatsinks.

SSO2 bearings

The NF-A8 has the renowned Noctua second generation SSO optimized bearings. With SSO2, the rear magnet is located closer to the shaft to provide greater stability, precision and durability.

Smooth Commutation Drive 2 (Soft Switching Unit 2)

The latest version of the advanced Smooth Commutation Drive system from Noctua guarantees excellent smooth operation because it eliminates torque variations and noise in PWM changes. That is why the NF-A8 is extraordinarily quiet even at the smallest distances.

3 speed settings for complete flexibility

By providing speed settings of 2000, 1650 and 1200 rpm through the Low-Noise and Ultra-Low-Noise adapters, the NF-A8 FLX (Flexibility) can be adjusted for superior airflow or maximum silence.

Extensive wiring options

The 20 cm main short fan cable minimizes cable buildup in typical applications, while the included 30 cm extension cable provides greater reach when necessary. The two cables are completely meshed.


  • Dimensions 80x80x25 mm
  • Space between mounting holes 71.5x71.5 mm
  • 3-Pin connection
  • SSO2 bearing
  • Series A blade geometry with flow acceleration channels
  • AAO (Advanced Acoustic Optimization) Frame Technology
  • Rotation speed (+/- 10%) 2000 RPM
  • Rotation speed with LNA (+/- 10%) 1650 RPM
  • Rotation speed with ULNA (+/- 10%) 1200 RPM
  • Flow rate 50.4 m³ / h
  • Flow rate with LNA 41.4 m³ / h
  • Flow rate with ULNA 28.9 m³ / h
  • 16.1 dB loudness (A)
  • Loudness with LNA 12.9 dB (A)
  • Loudness with ULNA 7.9 dB (A)
  • Static pressure 1.96 mm H₂O
  • Static pressure with LNA 1.40 mm H₂O
  • Static pressure with ULNA 0.74 mm H₂O
  • Max. 0.84 W
  • Max. 0.07 A
  • 12V voltage
  • MTTF> 150,000 h
  • Delivery volume
    • Noise Reduction Adapter (LNA)
    • Adapter for ultrareduction of noise (ULNA)
    • 3 to 4 pin adapter
    • Extension 30cm
    • 4 Vibration-Compensators
    • 4 fan screws

Question (0)

Pas de questions pour le moment.

Votre question a été envoyée avec succès notre équipe. Merci pour la question!
Poser une question
chat Commentaires (0)