Ventilateur Noctua NF-A4x10 FLX 4500RPM

Equipped with advanced aerodynamic design measures, such as Flow Acceleration Channels and the Noctua AAO frame, the NF-A4x10 FLX is a silent fan, top quality and highly optimized, with a size of 40 x 10 mm Smooth Commutation Drive technology and Noctua SSO2 reference bearings guarantee spectacular performance fluidity and excellent long-term stability.

Stream Acceleration Channels

The NF-A4x10 impeller has flow acceleration channels on the suction side. By accelerating the flow of air in the outer part of the most important blades, the separation of the flow in the suction side is reduced and, therefore, better efficiency and lower vortex noise are achieved.

Reduced engine hub size

Thanks to its simplified and compact motor design, the engine hub of the NF-A4x10 is smaller than that of conventional 4 cm fans. This makes a larger blade surface possible and, therefore, contributes to the greater air flow and fan pressure performance.

AAO frame

Noctua’s AAO (advanced acoustic optimization) frames feature integrated anti-vibration pads, as well as the step-by-step entry design and internal surface microstructures (both owned by Noctua), which further enhance the sound efficiency and performance of the fan.

Step by step input design

Noctua’s step-by-step entry design adds turbulence to the air inlet to facilitate the transition from laminar flow to turbulent flow, which reduces tonal input noise, improves flow attachment and increases suction capacity, especially in environments with restricted space.

Internal surface microstructures

With the ends of the fan blades colliding with the boundary layer created by the Inner Surface Microstructures (internal surface microstructures), the separation of the flow from the suction side of the blades decreases significantly, resulting in a noise of passage between the lower blades, better air flow and greater pressure efficiency.

Integrated anti-vibration pads

The integrated anti-vibration pads, made of extra soft silicone, minimize the transmission of vibrations per minute, while maintaining compatibility with all standard screws and other mounting systems.

Smooth Commutation Drive 2

The latest version of Noctua’s advanced Smooth Commutation Drive system ensures spectacular performance fluidity by eliminating torsional variations and switching noise. This makes the NF-A4x10 remarkably silent even over very short distances.

SSO2 bearings

The NF-A4x10 has the second generation, even more optimized, of the renowned SSO bearings from Noctua, with proven efficiency. With SSO2, the rear magnet is placed closer to the shaft to provide better stabilization, accuracy and durability.

Noise reduction adapter for complete flexibility

The NF-A4x10 FLX (“Flexibility”) is provided with a noise reduction (LNA) adapter that reduces the maximum fan speed from 4500 to 3700 rpm, so that it can be adjusted to the maximum for airflow higher, or a minimum sound level.

3 to 2 pin adapter and polarity protection

The NF-A4x10 includes a 3-pin Molex adapter to the 2-pin connectors used on many graphics cards, or on network and storage devices. An integrated diode provides protection against polarity on 2-pin connections.

OmniJoin adapter set

Many devices with 40mm fans use proprietary fan connectors, so the NF-A4x10 includes a Noctua OmniJoin adapter set. Simply cut the original fan cable, secure it to the adapter using the included 3M Scotchlok ™ connectors, and you can connect the NF-A4x10 to the proprietary fan connectors.

Extensive wiring options

The 20 cm main short fan cable minimizes cable buildup in typical applications, while the included 30 cm extension cable provides greater reach when necessary. The two cables are completely meshed.

Specifications

• Dimensions 40x40x10 mm
• Space between mounting holes 32×32 mm
• 3-Pin connection
• SSO2 bearing
• Series A blade geometry with flow acceleration channels
• AAO (Advanced Acoustic Optimization) Frame Technology
• Rotation speed (+/- 10%) 4500 RPM
• Rotational speed with LNA (+/- 10%) 3700 RPM
• Flow 8.2 m³ / h
• Flow rate with LNA 6.6 m³ / h
• Loudness 17.9 dB (A)
• Loudness with LNA 12.9 dB (A)
• Static pressure 1.78 mm H₂O
• Static pressure with LNA 1.21 mm H₂O
• Max. 0.6 W
• Max. 0.05 A
• 12V voltage
• MTTF> 150,000 h
• Delivery volume
  • Noise Reduction Adapter (LNA)
  • 3 to 2 pin adapter
  • OmniJoin adapter set
  • 30 cm extension cable
  • 4 Vibration-Compensators
  • 4 fan screws