Designed for the most demanding industrial applications that need improved cooling performance and more advanced protection, the Noctua NF-F12 industrialPPC (Protected Performance Refrigeration) is a robust, high-speed version of the company's award-winning model.
Thanks to the incredible aerodynamic efficiency of the NF-F12's design and the use of a new three-phase motor, the industrial version PCP offers superior air flow and pressure capacity, while maintaining low noise and energy consumption levels in front of high speed fans.
While its construction in fiberglass reinforced polyamide and its certified protection against water and dust make the NF-F12 industrialPPC suitable for use in extreme environments, the renowned SSO2 bearings guarantee an average lifetime between failures ( MTBF) of more than 150,000 hours. This product has the proven reliability of Noctua so the NF-F12 industrialPPC is the ideal choice for the most demanding applications that need superior airflows and maximum reliability.
Award-winning NF-F12 design
After receiving more than 150 awards and recommendations from the international press, the Noctua NF-F12 has become the best and safest choice for 120mm refrigeration needs. Its recognized efficiency has convinced tens of thousands of customers worldwide
Industrial versionPPC 3000 rpm
With twice the speed of the 1500 rpm version, the NF-F12 industrialPPC-3000 PWM offers extreme airflow and pressure performance. The robust polyamide construction, characteristic of the industrial series PCP, and the advanced protection characteristics make the fan ideal for the most demanding industrial applications.
Three-phase motor design
While most axial fans use single-phase motors with 4 slots, Noctua industrialPPC fans feature a three-phase design with 6 slots, which provides a smoother transition between slots and thus allows operation even softer and quieter, a reduction in vibration and unprecedented energy efficiency.
Improved energy efficiency
While the standard NF-F12 is one of the most efficient 120mm and 1500rpm fans, the industrial versionPPC with three-phase motor offers a 10% more reduction in energy consumption when compared to the 2000 rpm version .
Fiberglass reinforced polyamide construction
Both the rotor and the Noctua industrial PC fan frame are entirely made of fiberglass reinforced polyamide. This makes the fans even more robust and resistant than standard fiberglass reinforced PBT fans.
Certified IP52 protection against water and dust
Thanks to a special varnish layer that covers the motor and the printed circuit board (PCB), the NF-F12 industrialPPC has an IP52 protection rating. This means that it is not only highly resistant to dust, but also resistant to water droplets, equivalent to 3 mm. of rainfall per minute.
Focused Flow ™ Frame
Designed for applications that require a lot of pressure, such as heatsinks and radiators, the Focused Flow ™ frame consists of eleven blades that straighten, channel and direct the air flow, allowing the NF-F12 to compete with fan performance Conventionals that operate at much higher speeds.
Variable angular distance and Vortex Control Notches (vortex control notches)
The NF-F12 blades are arranged in variable angular distance and have Vortex-Control Notches (vortex control notches). Both measures contribute to distributing the sound emission over a wider frequency spectrum and, consequently, the sound pattern of the fan is more pleasing to the human ear.
Heptaperf ™ Rotor
Specially designed for the new Focused Flow ™ frame and to work together with the eleven blades, the NF-F12 seven-blade Heptaperf ™ rotor has been carefully optimized for a perfect balance between power and silence.
Frame with AAO
The frames with AAO (Advanced Acoustic Optimization) from Noctua have integrated anti-vibration pads, in addition to patented Noctua technologies such as Stepped Inlet Design (step input design) and Inner Surface Microstructures (internal surface microstructures) that They improve the efficiency of performance by fan noise.
Stepped Inlet Design
Noctua's Stepped Inlet Design adds turbulence to the inflow to facilitate the transition from laminar flow to turbulent flow, which reduces the tonal noise of input, improve flow adhesion and increase suction capacity, especially in confined space environments.
Inner Surface Microstructures
With the ends of the fan blades colliding with the boundary layer created by the Inner Surface Microstructures, the separation of the flow from the suction side of the blades decreases from Significantly, resulting in a passing noise between the lower blades, better air flow and higher pressure efficiency.
pads The integrated anti-vibration pads, made of extra soft silicone, minimize the transmission of smaller vibrations, while maintaining compatibility with all standard mounting systems and fan clips used in heatsinks.
The NF-F12 industrialPPC has the second generation, even more optimized, of the renowned and effective Noctua SSO bearings. With SSO2, the rear magnet is placed closer to the axle to provide better stability, precision and durability.
To ensure the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the NF-F12 industrialPPC boasts a milled CNC bearing made entirely of brass.
Own-designed PWM IC with SCD
By providing fully automatic PWM speed control, the NF-F12 industrialPPC uses the NE-FD2 PWM IC, specially designed by Noctua for three-phase motors. The NE-FD2 integrates Noctua's patented Soft Switching Unit (SCD) technology, which suppresses PWM switching noises and thus makes the fan quieter at lower speeds.
Customizable for industry customers
Upon request by industry customers, some features, certificates, packaging options and accessories can be customized. For example, we can offer 24V versions, different connectors and speeds, different cable lengths or UL and TÜV certificates. Feel free to contact us when requesting such customizable options.
- Dimensions 120x120x25 mm
- 4-pin PWM connection
- SSO2 bearing
- Heptaperf ™ blade geometry
- FocusedFlow ™ frame technology
- Rotation speed (+/- 10%) 3000 RPM
- Rotation speed min. (PWM, +/- 20%) 750 RPM
- Flow 186.7 m³ / h
- Loudness 43.5 dB (A)
- Static pressure 7.63 mm H2O
- Max. 3.6 W
- Max. 0.3 A
- 12V voltage
- MTBF> 150,000 h
- Delivery volume
- 4 fan screws
- 6 year warranty
- IP52 protection index
- Material Fiberglass reinforced polyamide
- Three-phase motor type