EK Water Blocks EK-XRES 100 Revo D5 PWM (incl. Pump)
zoom_out_map
chevron_left chevron_right

EK Water Blocks EK-XRES 100 Revo D5 PWM (incl. Pump)

0,00 DH
block Rupture de stock

redeem
Pas de point bonus pour ce produit.


Module gratuit de QRcode proposé par Mediacom87

Description

RL KIT
CPU BLOCK
VGA BLOCK
CHIPSET BLOCK
HDD BLOCK
RAM BLOCK
PUMPS
TANKS
RADIATORS
FITTINGS, TUBES AND ADAP.
ACCESSORIES
ADDITIVES
TECHNICAL DATA:

EK-XRES 100 Revo D5 PWM is a High-Performance water cooling pump with integrated reservoir. The core of the unit is the market-proven Laing D5 PWM water pump. This unit offers increased hydraulic performance (up to 15%) compared to original Laing D5 PWM.

The EK-XRES Revo D5 series features a fully rounded design thus offering greater usability, allowing installation at any angle within 360 ° of rotation. Special rubber shock absorber is used to de-couple the the main pump body from the mounting clip for silent operation, free of vibration induced noise. Additionaly, horizontal and vertical positioning are supported for easier tube routing possibilities.

EK-XRES 100 Revo D5 series reservoirs comes preinstalled with anti-cyclone insert. Additionaly a PU anti-vortex foam and EK-HD Tube are enclosed.

This water pump / reservoir combo unit can be mounted directly on computer chassis by using enclosed Revo D5 Holder.
Tube is made of quality acrylic material, while the reservoir bottom / pump top is made of quality POM Acetal material.

EK-XRES 100 Revo D5 pump can also be upgraded with either EK-UNI Pump Bracket (120mm FAN) - Regular or Vertical which allow installation of the product in any position with 120mm type fan hole pattern as shown on the picture below:
This reservoir can be easily upgraded with longer acylic tubes used by EK-RES X3 series reservoirs.


Pump electrical and mechanical properties:
- Motor: Electronically commuted spherical motor
- Rated voltage: 12V DC
- Power consumption: 23W
- Maximum pressure head: 3.9m
- Maximum flow: 1500L / h
- Maximum system temperature: 60 ° C
- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminum oxide, hard coal
- Power connector: 4-Pin Molex- and 4-Pin PWM FAN connector

Technical specifications:
- Reservoir diameter 60mm
- Reservoir free volume: ~ 125mL
Overal unit height : 150mm
- Mounting hole pattern: 65x34mm

Enclosed:
- EK-XRES 100 Revo D5 PWM (incl. Pump)
- Mounting clip with rubber insert
- Self-adhesive mounting hole pattern sticker
- Anti-vortex PU foam and 12mm OD plexi-glass tube
- Mounting mechanism (incl. Required Allen keys)
- Installation manual

Additional Info
Threads G1 / 4

Fiche technique

A041656
2 kg

chat Commentaires (0)