EK Water Blocks EK-CoolStream XE 120
zoom_out_map
chevron_left chevron_right

EK Water Blocks EK-CoolStream XE 120

821,00 DH
block Rupture de stock

redeem
Achetez ce produit, et collecter jusqu'à 1 Point de fidélité . Votre panier contiendra le total 1 point qui peut être converti en un bon de réduction 5,00 DH .


Module gratuit de QRcode proposé par Mediacom87

Description

RL KIT
CPU BLOCK
VGA BLOCK
CHIPSET BLOCK
HDD BLOCK
RAM BLOCK
PUMPS
TANKS
RADIATORS
FITTINGS, TUBES AND ADAP.
ACCESSORIES
ADDITIVES
TECHNICAL DATA:

EK-CoolStream XE is a extreme-performance computer water-cooling radiator which combines EK's unique CSQ design with latest radiator core engine. Built for EK-Vardar 120mm high static pressure fans, these radiators are optimized for maximum heat dissipation across entire fan operational range thus delivering exceptional performance at both low- and high airflow operation.

EK assured quality level, optimal price-performance ratio and unique minimalistic design make these EK-CoolStream XE series radiators a perfect choice for any computer water cooled system.

This radiator offers best cooling capacity in the 60mm thick radiator class: Triple stack copper fins provide massive surface area while the parallel flow cooling chambers reduce hydraulic flow resistance to a minimum. Radiator shrouds are tapped with UNC 6-32 threads on both sides to enable push-pull fan installation to even further increase the cooling performance.

This product features four recessed G1 / 4 threaded ports with two pre-installed extenders from the front side to allow any G1 / 4 threaded fitting to be used. From the back side the ports are closed with two G1 / 4 plugs. EK recommends EK-ACF series compression fittings.

Technical details: 
Material: 
- Copper fins
- 90% copper tubing (H90)
- Brass chambers
- Aluminum / Steel housing

Dimensions: 160 x 130 x 60mm (L x W x H)
Weight: 0.85kg
Liquid Capacity: ~ 230mL
FPI: 16
Port threads: 4x G1 / 4
Fan compatibility: any standard size 120x120x25mm fan; UNC 6-32 thread tapping
Pressure tested: 1bar (g)

Enclosed : 
- EK-CoolStream XE series radiator / w two pre-installed G1 / 4 extenders
- Flat-head UNC 6-32 screws (l = 30mm)
- Flat-head UNC 6-32 screws (l = 5mm)
- Allen key 2.5mm
- Allen key 9mm
- Allen key 6mm

PLEASE NOTE:
- When using fans other than standard 120x120x25mm size please use appropriately long screws! 
- Use of the improperly long screws may result in piercing of the radiator core and irrepairable damage the product. Such misuse is not covered by product warranty!

Fiche technique

A038503
2 kg

chat Commentaires (0)